Related Articles
How to Interpret and Use Mapfiles
Overview In Central's Hardware Configuration utility, under the 'Location' header is a Bank assignment and a Pin number. Each Bank, which is lettered A to H, has 32 Pins, which are numbered 1-32. The number of Banks multiplied by 32 is your system's ...
NEV and NSx File Specifications
See the attached PDF for the current file specifications. Below you'll find a screenshot of our short summaries for the currently available file specifications in Central 7.0.6:
Concatenating segmented files in NPMK
Occasionally during recording sessions, users may encounter brief packet loss or they may pause and resume file recording themselves. When this happens, Central File Recording will write a new header to the file, causing the data to become segmented ...
How to Interpret Digital Input Data
Introduction In Raster Plot, Central can visualize digital inputs as separate pins, but the data is not saved as separate channels for each pin. Rather, the state of all sixteen pins makes up a single 16-bit integer value. Additional information can ...
Broadcasting Data from the CerePlex Direct to Multiple Computers
Introduction Unlike the Neural Signal Processor, the CerePlex Direct can normally only interact with one computer at a time through its USB connection. This article covers a method that allows data from a CerePlex Direct to be sent to multiple ...